Welcome to
A320 Air Conditioning System (ATA21) Quiz
This quiz contains 20 question on Airbus 320 (A320) and time limit is 30 min.
All the question are compulsory for the submission of the quiz.
The number of attempts allowed is unlimited.
Note : The question will be picked randomly from a question bank hence few question can repeat every time you attempt the quiz
ALL THE BEST
1.
With the pressurization system in the automatic mode, which valves are closed when the ditching push button is selected on?
2.
Pressurization is normally automatic. Can you interfere with it?
3.
The PACK FLOW controller is set to NORM and yet the ECAM display shows PACK FLOW to be high. How is this possible?
4.
What is the normal maximum cabin altitude?
5.
Aft cargo temperature indications may be found on which ECAM page(s)?
6.
It is permissible to use simultaneously packs and LP ground unit during long stops in a hot airfield
7.
When would you select RAM AIR ON?
8.
Hot air pressure regulating valve:
9.
When does normal depressurization occur?
10.
Trim air valve, each one optimizes the temperature by:
11.
Hot air fault light illuminates on the air conditioning panel
12.
Conditioned air is distributed to
13.
What happens to the pack flow control valves during engine start?
14.
When does normal pressurization occur?
16.
What is the Max. negative Diff. pressure for the cabin?
17.
What position do the pack valves go to in the event of a loss of the bleed system pressure?
18.
During flight below _____, Ram Air Valve can provide an emergency source of conditioned air during non- pressurized flight.
19.
How many temperature selectors are there on the A320? How many temperature zones are there?
20.
Pressurization controllers receive inputs from: